Reedin SuperWing X - CC1 red 6.0qm 1x geflogen

SUPERWING X came from designing wings for the past three years and coming to the conclusion that if we wanted higher performance, we needed to use higher performance material. We started working with the leading X-PLY manufacturer to create a thinner, lighter and more ductile X-PLY material specifically designed for SUPERWING X. The X-PLY is stiffer, stronger and has virtually no stretch compared to conventional canopy material. This provides a ride like you’ve never experienced before when winging. The whole platform is much stiffer with barely any flutter even when the wing is flown at neutral making it the most stable and silent ride you’ll ever experience.

The Use of X-PLY would not have been possible without our patent pending FOLDSTRIP that allows for the wing to be carried in a small bag. The FOLDSTRIP allows the wing to be folded in half at the level of the canopy material strip then rolled preventing creases on the X-PLY.

The Aspect Ratio evolves along with each size. Bigger sizes have a lower AR for a shorter wing span and better low end power, while smaller sizes have a slightly higher AR for superior high end control and speed. This also prevents the wingtip of bigger sizes from touching the water.

Built under tension for the most stable profile and wing, providing a very direct feel with minimal flutter when riding. This ensures a very stable ride, both in neutral at the front handle, as while riding.

The triple axis grid of the X-PLY perfectly spreads the effort throughout the entire canopy. This translates into a much more efficient wing.

Provides a very direct response because the back of the strut is directly connected to the canopy of the wing. The recess at the level of the handle allows for a short handle that still provides ample room for your hands, so you can have a very direct control of the wing, while keeping your hands comfortable.

Wide handles in order to easily adjust your position and change to wind force. The internal core makes the handle stiff, and it's covered with a soft and comfy sleeve made of a grippy, abrasion resistant canvas.

A third Layer of dacron in the center of our Leading Edge provides extra stiffness to your wing for minimal deflection under load, translating into a more direct feel and a more efficient wing Overall.

Hose and dump valve are located in the very front of the strut, which acts as a lock for the strut bladder to prevent unwanted movements when the wing is deflated.